Ancel BA101 12V Auto Battery Load Tester 100-2000CCA Analyzer Cranking Charging

Description

Store category
Sign Up Now !
You may also like
12V Auto Car Battery Load Tester Analyzer BA101 Cranking Charging System Test US
Product Description
Feature:
1. Accurate tester result in miliseconds (tolerance ±15)
2. BA101 can test CCA100-2000, 30-220Ah, which is the highest CCA in the market
3. Test batterues on and off the vehicle
4. Battery life analysis, Life in percentage (%),Internal re​​sistance value (m),Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
5. Test result based on JIS, EN, DIN, SAE and IEC standards.
6. Easily read LCD screen display
7. Quick test - input battery volume (AH), then it can show the battery status.
8. vehicle cranking system test - cranking time, voltage and status.
9. vehicle charging system test - load voltage, unloaded voltage, ripple status and charging system status.
10. Store the testing result, print function
ONE-CLICK QUICK TEST
It can make sure the battery status, including voltage, CCA, electronic resistance, rated CCA, charging value, healthy value and testing result in one second. Once input the AH value—battery rated capacity, which is marked in the label of the battery.
1). Press UP/DOWN key to select the Quick test, then press ENTER key to confirm.
2). Input the rated battery capacity—xx AH, in general, the battery capacity for 12V vehicle is above 30AH.
3). Then press enter key, the testing result will show.
Result:
1.Good Battery:
The battery is without any problem, please be relaxed to use
2.Good Recharge:
Good battery but low current, recharge before using.
3.Replace:
The battery is near to or already reached the end of the using life, replace battery, otherwise, bigger danger will be followed.
4.Bad Cell,Replace:
Battery interior damaged, bad cell or short circuit, replace battery.
5.Charge-retest:
Unstable battery shall be recharged and retested to avoid error
Functions
Battery Test
displays SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and the reliable analysis results on readable LCD screen for your reference.Regularly check your battery status for signs of weakness or erosion, keep a close eye on battery function you can fix potential problems before they happens.
Cranking Test
1. Entering cranking test and starting the engine as prompted, tester will automatically complete the test;
2. The tester will display the result including actual cranking voltage and actual cranking time;
3. If cranking voltage value is lower than 9.6V, the cranking system is regarded as abnormal;
4. If cranking voltage value is higher than 9.6V, the cranking system is OK.
Charging Test
1. Charging Volt: Normal – the generator output is normal, no problem detected;
2. Charging Volt: Low – check the drive belt of the generator and the connection between generator and battery, or follow the manufacturer’s suggestion to eliminate generator fault;
3. Charging Volt: High – replace the generator assembly or a regulator to avoid battery damages;
4. No Volt Output: check the generator connection cable and the belt;
5. Diode Test: there is at least one diode is damaged if ripple volt is too high.
Operating Parameters
1.System voltage: 12 Volts
2.Input voltage range: 9V~15V
3.Power requirements: No internal batteries required. Power on when hooked up during testing.
4.AH range: 30-220AH
Application
Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
-
We accept paypal.
-Payment must be made within 8 days.
If you don't make the payment within 8 days, you may received a Non-payment message
automatically
sent
f
rom eBay. Non-payment may result in an UPI
(Unpaid Item), eBay will
automatically close your account
if you accumulate 4 UPI's total.
Total amount due includes the final
auction price plus S&H(Shipping and Handling).
-Your package will be out
within 1-
2 business day
or
12-48 hours
after payment cleared
(not including holiday and weekend)
.
Delivery details
-Located in CA, US and KY, US.
-Usually it takes 2-3 working days in CA or KY.
-For other states, it may takes 3-7 working days.
-
Shipping terms
:
UPS GROUND SERVICE
/
UPS Surepost Service / USPS First Class Mail Tracked Service
/
U
SPS Priority Mail Parcels Tracked Service
.
-
After the payment cleared, your order will be sent out within 1-2 business days (not including holiday and weekend) by USPS or UPS.
-
Shipping address supplied by Paypal is acceptable.
-If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated!
Terms of sales
Return Policy
Please return the item within 30 days after receiving if you are not happy with your purchasing.All returns are expected to be in original conditions, please email us first for return address and instructions. Thanks
About us
We have been engaged for many years in the line of automobile diagnosing instruments and our corporation is established for the purpose of trustworthiness. Your satisfaction is our sole mission.
We have three warehouses that are located in HongKong,Shenzhen and US. We assure you not only good service but also excellent products.
Contact us
-Please do not hesitate to leave us your
Positive
Feedback
and
5
-
stars
★★★★★
of DSR,
they are our life.
-I
f you
are unsatisfied
with your purchase,
please email us first to get a better solution
before
you leave a
neutral
or
negative feedback
,
w
e will try our best to help you. Thank you.
-Customer Service Hours: M-F: 9:30AM - 18:00PM BST (Beijing Standard Time).
Feedback
BA101 Automotive 12V Vehicle Battery Tester Advantage: 1. Simple and easy to use 2. Test batteries on and off the vehicle 3. Accurate results in milliseconds 4. Battery Life Analysis 5. Analysis Result : Good or Replace 6. Large easy to read LCD display. 7. Test results based on JIS, EN, DIN, SAE and IEC Standards. 8. Quick test—input battery volume (AH), then it can show the battery status. 9. vehicle cranking system test--- cranking time, voltage and status. 10. vehicle charging system test—load voltage, unloaded voltage, ripple status and charging system status. 11. Store the testing result, print function ect........