Ancel BA101 12V Automotive Car Battery Tester Charging Cranking Test Analyzer

Description

Store category
Sign Up Now !
You may also like
Ancel BA101 12V Automotive Car Battery Tester Charging Cranking Test Analyzer
Product Description
Feature:
1. Accurate tester result in miliseconds (tolerance ±15)
2. BA101 can test CCA100-2000, 30-220Ah, which is the highest CCA in the market
3. Test batterues on and off the vehicle
4. Battery life analysis, Life in percentage (%),Internal re​​sistance value (m),Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
5. Test result based on JIS, EN, DIN, SAE and IEC standards.
6. Easily read LCD screen display
7. Quick test - input battery volume (AH), then it can show the battery status.
8. vehicle cranking system test - cranking time, voltage and status.
9. vehicle charging system test - load voltage, unloaded voltage, ripple status and charging system status.
10. Store the testing result, print function
ONE-CLICK QUICK TEST
It can make sure the battery status, including voltage, CCA, electronic resistance, rated CCA, charging value, healthy value and testing result in one second. Once input the AH value—battery rated capacity, which is marked in the label of the battery.
1). Press UP/DOWN key to select the Quick test, then press ENTER key to confirm.
2). Input the rated battery capacity—xx AH, in general, the battery capacity for 12V vehicle is above 30AH.
3). Then press enter key, the testing result will show.
Result:
1.Good Battery:
The battery is without any problem, please be relaxed to use
2.Good Recharge:
Good battery but low current, recharge before using.
3.Replace:
The battery is near to or already reached the end of the using life, replace battery, otherwise, bigger danger will be followed.
4.Bad Cell,Replace:
Battery interior damaged, bad cell or short circuit, replace battery.
5.Charge-retest:
Unstable battery shall be recharged and retested to avoid error
Functions
Battery Test
displays SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and the reliable analysis results on readable LCD screen for your reference.Regularly check your battery status for signs of weakness or erosion, keep a close eye on battery function you can fix potential problems before they happens.
Cranking Test
1. Entering cranking test and starting the engine as prompted, tester will automatically complete the test;
2. The tester will display the result including actual cranking voltage and actual cranking time;
3. If cranking voltage value is lower than 9.6V, the cranking system is regarded as abnormal;
4. If cranking voltage value is higher than 9.6V, the cranking system is OK.
Charging Test
1. Charging Volt: Normal – the generator output is normal, no problem detected;
2. Charging Volt: Low – check the drive belt of the generator and the connection between generator and battery, or follow the manufacturer’s suggestion to eliminate generator fault;
3. Charging Volt: High – replace the generator assembly or a regulator to avoid battery damages;
4. No Volt Output: check the generator connection cable and the belt;
5. Diode Test: there is at least one diode is damaged if ripple volt is too high.
Operating Parameters
1.System voltage: 12 Volts
2.Input voltage range: 9V~15V
3.Power requirements: No internal batteries required. Power on when hooked up during testing.
4.AH range: 30-220AH
Application
Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1. Paypal is the only payment we accept.
2. Your package will ship out within 1 business day after payment cleared (not including holiday and weekend).
Delivery details
1. Shipping terms: Int'l Express / Registered Air mail.
Included but not limited to: USPS, UPS, DHL, Fedex, postal delivery, etc.
2. Shipping address supplied by Paypal is acceptable. Please make sure your address is correct and include phone number.
3. If not received item due to any unexpected factor, please wait patiently and contact us. Your understanding would be highly appreciate!
Terms of sales
1. We are not responsible for Buyer's Local taxes.
2. It is buyer's responsibility to complete clearance when parcel reached your Customs. We will try our best to help you get your package.
3. About return: please email us first for return address and instructions within 30 days after receipt. Items need to be in original conditions.
About us
1. We are specialized dealer of OBD tools and automotive electronics.
2. We support remote assistance by teamviewer if you have any difficulty in software installation.
3. Our items come with warranty and good service.
Contact us
1. Any questions, you can feel free to contact me via email / ebay message / whatsapp.
2. Please contact me first before giving negative feedback or opening case. Wish we can solve the problem peacefully.
3. Much appreciated if you could leave us positive feedback with five stars.